Fading Eyes LED Kit

This is the Electronic Fading Eyes Kit. This neat hobby project produces a "Fading Eyes" effect. It will generate a ramping voltage which will slowly turn on the two LEDs and then slowly turn them off. There is an adjustment for the speed of the effect. This is also an excellent circuit that can be used as a Dual Op Amp tester.Please be sure to select a color for the kit or the default will automatically set as RED!

The PCB is double-sided, plated thru-hole, 1.20" long x 2.20" wide made of .062" FR-4 epoxy glass. It has green Solder Mask (LPI) on both sides with white Silk Screen on the Top side and four mounting holes.Most colors will run off 9v but Purple reuires 12v.
This kit is also offered as a "Built & Tested" for those that do not want to build the kit themselves.

This kit does not include the tools you will need to assemble the circuit. You will need tools such as a soldering iron, solder, wire cutters, etc.
The kit includes the following:
 
Type
Part Description
Quantity
IC
LM358N, Dual Op Amp, DIP, 8-pin
1 ea
Transistor
2N4401, NPN, Signal, TO-92
1 ea
PCB
Fading Eyes PCB, NightFire
1 ea
Schematics
Fading Eyes Circuit
1 ea
Instructions
Basic Soldering & Components ID
1 ea
Resistor
120 Ohms, 1/4 Watt, Carbon Film
1 ea
Resistor
43K Ohms, 1/4 Watt, Carbon Film
3 ea
Resistor
100K Ohms, 1/4 Watt, Carbon Film
1 ea
Capacitor
.1uF, Ceramic Disc
1 ea
Capacitor
4.7uF, Aluminum, Radial
1 ea
Capacitor
10uF, Aluminum, Radial
1 ea
Capacitor
22uF, Aluminum, Radial
1 ea
LED
Select from list of Colors
2 ea
Potentiometer
100K, Single-Turn, Thru-Hole, PCB Mount
1 ea