14-Watt Guitar Amplifier with Marshall Tone Stack Kit (#9283)

14-Watt Guitar Amplifier with Marshall Tone Stack Kit
14-Watt Guitar Amplifier with Marshall Tone Stack Kit14-Watt Guitar Amplifier with Marshall Tone Stack Kit14-Watt Guitar Amplifier with Marshall Tone Stack Kit
Price: $28.50

This kit is a very clean-sounding 14-watt Guitar Amplifier. This is great for learning new songs or just playing along with your favorite music.

It will accept your guitar input via a 1/4" phono jack. The guitar sound is then routed thru a Marshall Tone Stack with Bass, Mid and Treble controls. It is then fed to a pre-amplifier prior to going into a 14-Watt audio amplifier. Connect the output to your speaker cabinet for a neat experience. The PCB is is approx 5.5" wide x 2.5" deep.

The output is available at a 1/4" jack AND at a 2-pin Screw Terminal. You get both in the kit.

The operating voltage is 12vdc. It has two 1000uF Capacitors on the input power for additional filtering. You will need a 12vdc power supply capable of delivering at least 2 amps, a 20-watt or better power supply will work just fine.

This is a kit. You will need soldering tools and supplies. A 4 to 8 Ohm, 10W speaker is required, none is supplied.

We also offer this as a Built & Tested unit for those that do not want to build it themselves.