EMF/Ghost Detector Strength Meter
This is the individual EMF Ghost Strength Meter/Detector. This Ghost Detector is an ultra-sensitive EMF Detector that can be used in your Paranormal investigations. You will be amazed at what these devices can detect. With some experimenting, you can discover when and where to place this Ghost Strengrh Detector for the best results.
It is a hand-held device which can be used as a stand-alone Strength Meter or can be used in your hand as you walk around. It has 10 LEDs which will light up from left-to-right as the input gets stronger. The LEDs stay lit only as long as it detects a presence. It can come on briefly or stay lit longer, depending on the electrical fields in the area.
You will get 1 built & tested device. It requires a 9v Battery; there are no batteries included with this set. There is an ON/OFF switch to power the unit. It is 3 inches wide by 4 1/2 inches long x 1 inch thick.
For those technical folks this circuit is a three-stage, un-tuned, wideband, Darlington LED amplifier. There are no pulse-stretching circuits to extend the LED On-time. If there is enough energy present to forward bias the first stage, then all hell will break loose, figuratively speaking, of course. Under right conditions, it can pick up your aura (static electricity) as you walk across your rug.
We cannot be held responsible for whatever may be conjured up by this, you're on your own. If you feel a cold chill and the LEDs turns super bright and stay on ... run!