Arduino Accessories Components Kit #1

This Arduino Accessories Components Kit #1 has some of the basic components you would use in most of your projects. It has 6 different LEDs, including Bi-Color and Tri-Color(R,G,B) LEDs, Resistors for LED current limiting, Speaker, Switches, Terminals, 9v Battery Clip, and four High Quality Prototyping PCBs.
One PCB set is a 2" diameter PCB, .062", FR-4, with 289 double-sided, plated-thru-holes spaced at .100" and the other PCB set is 1" x 2" rectangular PCB, .062, FR-4, with 162 double-sided, plated-thru-holes also spaced at .100". Both PCBs have mounting holes.
To further ensure that your kit building supplies are complete, there is also a wire packet consisting of Red, Black, Green, Yellow, Blue, and White 22AWG, multi-strand wires. 
All this in a plastic Storage Container that you can use in your project or use for Storage. You will get the following items:
Type
Part Description
Quantity
PCB
Blank Prototyping, 2" Round, 289 PTH Holes
2 ea
PCB
Blank Prototyping, 1" x 2" Rectangular, 162 PTH Holes
2 ea
Resistor
390 Ohms, 1/4 Watt, 5%, Carbon Film
10 ea
Resistor
1K ohms, 1/4 Watt, 5%, Carbon Film
10 ea
Resistor
10K ohms, 1/4 Watt, 5%, Carbon Film
10 ea
Resistor
100K ohms, 1/4 Watt, 5%, Carbon Film
10 ea
Resistor
1M ohms, 1/4 Watt, 5%, Carbon Film
10 ea
LED
Green, Bright, Round, 5mm
5 ea
LED
Yellow, Bright, Round, 5mm
5 ea
LED
Red, Bright, Round, 5mm
5 ea
LED
Blue, Bright, Round, 5mm
5 ea
LED
Bi-Color, Green & Red , Bright, Round, 5mm
5 ea
LED
Tri-Color, R, G, B, Bright, Round, 5mm
5 ea
Battery Clip
9V, Snap-type, 2 wires
1 ea
Speaker
8 Ohms, .1 Watt, Round, Miniature
1 ea
Switch
Pushbutton, SPST Momentary, PCB Mount
6 ea
Switch
4-Position Switch, DIP-8
1 ea
Switch
2-Position Switch, DIP-4
1 ea
Connector
2-Pin Screw Terminal
2 ea
Connector
3-Pin Screw Terminal
1 ea
Wire
Packet, 10 pieces 6" , 22 AWG, Single strand
1 pk
Enclosure
Plastic Box, Hinged
1 ea